Fixture Calibration Procedure - Keysight Technologies PD1000A Operating Manual

Test Fixture Calibration

Fixture Calibration Procedure

The PD1000A Test Fixtures were developed to test semiconductor devices with
standard device packaging. Each fixture type has its own Calibration Standards
kit.
Keysight PD1000A Test Fixture Operating Guide
Calibration procedures for the PD1000A Test Fixtures are the
same. Use the appropriate mechanical calibration standard
devices supplied with your test fixture. Do not use an E-CAL
standard.
The following procedure describes the Keysight E5080A ENA
Vector Network Analyzer Calibration procedure. If you are using a
different analyzer, the procedure may be different. For detailed
calibration procedures, refer to the analyzer's documentation.
21