Setting Mac Address Of Controller - Honeywell Spyder 5 User Manual

SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE

Setting MAC Address of Controller

At any point, the automatically or manually assigned MAC address of an IRM controller and the Max Master setting can
be changed in Niagara.
Procedure
1. Open the Property Sheet of the IRM controller.
2. In Address, change the MAC Address as desired.
3. Confirm by clicking Save.
4. If the changed address is the highest address on the MSTP network, change the Max Master setting as follows.
5. Expand the Config / Device Object area.
31-00282ES-01 104