Honeywell Spyder 5 User Manual page 40

SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE
5. Repeat steps 2 through 4 for all controllers.
6. Discover the controllers. This will list all offline devices.
7. At the site, go online by connecting to the network.
8. Discover the controllers on the network.
9. Now software searches for controllers that have the same serial numbers issued offline.
10. Add the controllers to the database.
RESULT: Once those controllers are added to the network, they will start communicating with the physical online
controllers.
While adding the discovered controllers to the database, a unique device Id is issued to each controller within the
range of the min and max Id limits configured in the IRM Config Properties (see screen above).
31-00282ES-01 40