Honeywell Spyder 5 User Manual page 34

SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE
3. On the Discovered pane, select the devices you want to add to the database.
4. Click Add.
RESULT: The Add dialog box displays. You can change properties of the devices before adding them to the database.
To do so, select the device and change the desired property from:
o Name
o Device ID
o Network
o Use Cov
o Max Cov Subscriptions
5. Click OK in Add dialog box.
RESULT: All devices are added to the database. The devices are learned from the project to the controller as indicated
by the following messages.
31-00282ES-01 34