Table of Contents
Advertisement
Connecting expansion systems
Connect the expansion systems using the installed 12 Gb/s SAS expansion board.
2.3.4
Power connection
Before connecting to a power source, ensure that all components are properly installed and the
management interfaces are properly connected.
Take a look at the list below and check the following:
1.
The drives are correctly installed to the drive trays.
2.
All drive trays are installed to the system, whether or not they contain a hard drive.
3.
The system is connected to at least one network via one of the 1 GbE Ethernet ports.
4.
Ensure that the ambient temperature is lower than 40°C.
EonStor GSe Pro 100 Series Hardware Manual
2-11
Hide quick links:
Advertisement
Table of Contents
