Setting Up The Tamper Event Actions - Rosslare AC-115 Installation And User Manual

• N2 - determines if the internal siren is activated when a
Forced Door Event occurs.
Enter "1" to enable this feature
Enter "0" to disable this feature
4. If the 2-digit Forced Door Event settings are entered
correctly, the Forced Door Event will be updated and the
controller will return to Programming Mode.
• The Mode LED will turn orange
If the 2-digit Forced Door Event settings are entered
incorrectly, the Forced Door Event settings will NOT be
updated. You will hear a long beep and the controller will
exit Programming Mode and return to Normal Mode.
• The Mode LED will turn green

4.25 Setting up the Tamper Event Actions

1. Enter Programming Mode
• Mode LED will turn orange
2. Press "43" to enter Menu 43
• The Mode LED will turn red
3. Enter the 2-digit Tamper Event settings.
• N1 - determines if the auxiliary relay is activated when a
Tamper Event occurs.
Enter "1" to enable this feature
Enter "0" to disable this feature
• N2 - determines if the internal siren is activated when a
Tamper Event occurs.
Enter "1" to enable this feature
Enter "0" to disable this feature
4. If the 2-digit Tamper Ajar Event settings are entered
correctly, the Tamper Event settings will be updated and
the controller will return to Programming Mode.
• The Mode LED will turn orange
If the 2-digit Tamper Event settings are entered incorrectly,
the Tamper Event settings will NOT be updated. You will
AC-115 Hardware Installation and User's Guide
Programming Instructions
Mode
Mode
Mode
Mode
Mode
Door
Orange
Door
Green
Door
Orange
4 3
Door
Red
N1 N2
Door
Orange
Page 40