HE-VA VARIO-EXACT Operating And Mounting Instructions Manual

E T
U R
R A
O-P
UK
Operating and mounting instruction:
Operating and mounting instruction:
SLUG-Security
VARIO-EXACT
Slug security, universal seeder for seeding small seeds and slug pellets.
Seeder unit: stainless steel. The seed output is carried out by a serrated seed roll. With the
speed of the seed roll you can adjust the output amount.
Step 1 is for the smallest amount output and the highest is
on step 10. From the hopper the seed gets out to the
spreader plate through the seed rolls and 1 tube. The
spreader plate distributes the seed semicircular.
According to the speed oft he spreader plate the spreader
width varies. Step 1 is for a small spreader width and step
10 for the most possible width. The spreader width
depends on the character of the seed. With heavy seed
(f.e.: slug pellets to 24 m; mustard, peas, rape) you can
reach a higher spreader width than with small and light
seed (f.e.: grass seed to 6-7m).
Take attention when adjusting the bottom flap (hand gear
lateral to seed unit). For big seed a small slot has to be
that the seed doesn´t crumble. For small seed put the bottom flap as near as possible to the
seed roll (otherwise you get amount differences).
The hopper is closed with a sealed cap. The seal has to be proofed periodical with seal
silicone.
For moving the outlet tube loose the 2 bolts. Now you can adjust the spreader radius exactly.
Every corn has its own flying character. So it is profitable to have the chance of adjusting the
Page 1 of 3
Details without guarantee!