Dismounting And Mounting The Clamp - Titan VS-32-L Operating And Maintenance Instructions Manual

9.9. Dismounting and mounting the clamp

To dismount the clamps relieve tension springs (116) by means of spring hooks.
Swing out sealing unit. Unscrew cover (33) and swing out clamp holder (45) incl.
clamp (47) (fig. 21). Remove bolts (48) and clamp holder incl. clamp from the
sealing unit.
After the check or the replacement slip the clamp including holder onto the rocker
(37) and link it to the bolt. Fasten cover and close sealing unit. Slightly lubricate all
sliding surfaces. Finally suspend the tension springs.
116
33
Fig. 21: Swinging out sealing unit.
48 47
Fig. 22: Remove linking bolts.
VS-32-L
46
B 13 GB 26/06