Titan VS-32-L Operating And Maintenance Instructions Manual page 10

Cleaning, maintenance, repairs:
Putting the unit out of operation, disassembly
Waste disposal
Should the strapping machine have to be disposed of at the end of its service life, separate
plastic material, steel and aluminium and dispose of such materials separately. In the same
way, motors and electric modules like control system, switches and cables must be admitted
to separate waste disposal. Take such elements to the appropriate waste management.
VS-32-L
Just trained technical staff is allowed to perform maintenance and
repair works on the strapping unit.
Attention! Before beginning with any maintenance work the
relevant staff must disconnect the strapping unit from the power
mains.
Attention! Wear protective glasses when cleaning the unit /
machine with compressed air.
Attention! When dismounting the strapping machine there is the
risk of squeezing.
Attention! Do not stay beneath the load during lifting and
depositing. Order individuals standing in the hazardous area to
leave it. Minimum carrying capacity see technical data on page 11.
If packing material is to be disposed of, take it to the relevant
recycling container or admit it to the Dual System.
B 13 GB 07/10
10