Setting The Distance Between Electrodes - Titan VS-32-L Operating And Maintenance Instructions Manual

8.6. Setting the distance between electrodes

The igniting electrode sharpened (see sketch) should project 2 mm out of the ceramic
gas nozzle (668).
Setting is performed as follows:
1. Manually unscrew the gas nozzle (668).
2. Detach the tensioning sleeve casing (666) by
means of torch wrench (560).
3. Insertion of the igniting electrode (669) into the
tensioning sleeve casing. The electrode should
project approx. 30 mm. Manually screw in casing.
4. Use the torch wrench preset to slip the electrode
into the casing to size and screw it.
5. Manually screw the gas nozzle firmly.
1.
668
3.
VS-32-L
666
669
B 13 GB 26/06
2.
560
4.
34