Table of Contents
Advertisement
The following oils can be used:
9.5. Maintenance of the transport unit
The maintenance and inspection of the transport (392) and tensioning (3401) wheels
should be performed every week. After the disassembly the tooting must be freed of
wax and paint residues by means of a wire brush.
The counter rollers (352) and (420) and the strap guidance's (4261) and (4251) should
be checked once a month and free of paint, dirt and wax residues.
Dismounting and mounting
The following tool is required for mounting and dismounting operations:
hexagon socket screw key SW 5, 6 and 8 mm, slotted screw driver.
Unscrewing the protecting ledges (1042/1172) and the flap backside (5691).
Loosening the fastening screw (372) of the retention pin (522) and removal at the
pin heel. Swinging out the counter bearing elements (3481/3491), simultaneously
lifting the tensioning motor (430). The counter roller (352) and the strap guidance
have canned then are cleaned (fig. 5 to 8).
When loosening the 2 fastening screws of the rocker cover (334) the latter can be
removed by means of its handle (400) and the tensioning wheel (3401) found
below can be dismounted. The tensioning wheel is linked to the driving shaft via a
feather key and can be removed towards the front (figs. 9 to 10).
The transport wheel (392) is secured by means of a safety disk (394). It can be
loosened by means of a screwdriver or pincers, and the transport wheel can be
removed towards the front. The counter roller (420) found below and the
guidance's (4251/4261) can then be cleaned (fig. 11).
Mounting is performed in the reverse order.
Slightly lubricate all parts (exc. screws).
VS-32-L
Esso
D 32
D 100
CL 320
DEA
Aries 32
Aries 100
Shell
Tonna Oil R32
Tonna Oil R100
Mobil
Almo 525
Almo 527
Almo 528
Worn-out wheels require replacement.
B 13 GB 26/06
-10 to
+30°C
+25 to
+55°C
+45 to
+75°C
-25 to
+20°C
0 to
+50°C
-10 to
+30°C
+25 to
+55°C
-20 to
+20°C
0 to
+30°C
more than
+15°C
40
Hide quick links:
Advertisement
Table of Contents
