General - Titan VS-32-L Operating And Maintenance Instructions Manual

Pneumatic strapping head for steel strap

Table of Contents

General

Thank you very much for your confidence in the technology of TITAN

These operating and maintenance instructions are meant to facilitate how to become

acquainted with the strapping machine and apply it as intended. The operating instructions

comprise important information on how the strapping machine can be used safely, as

intended und economically.

The operating instructions must permanently be available at the place the strapping head is

used. They must be read and applied by all staff members working with the strapping head.

Such works especially include operation, troubleshooting and maintenance.

Adjustment and maintenance works may only be performed

Notes on the warning and information symbols:

The item numbers (...) and designations used in these operating instructions refer to the

spare parts list or documentation on the electrical system.

The contents of this document must not be duplicated, handed to third parties, published or saved in any form,

neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.

VS-32-L

Umreifungstechnik GmbH & Co. KG!

by trained technical staff.

Caution!

Is used in case of risks threatening life and health.

Attention!

Is used in case of risks which may cause damage to objects.

Note!

Is used for general notes and such notes whose disregard may result

in faults in the course of operations.

is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.

B 13 GB 33/06

Table of Contents

Show Quick Links

Table of Contents