Companion Software Installation; Mr3 Installation; Companion Software Configuration - Noraxon Ultium EMG User Manual

Analog Output

6.5 Companion Software Installation

The Ultium System is compatible Noraxon MR3 software.

6.5.1 MR3 Installation

1. Insert the MR3 USB flash drive into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
4. Double click

6.6 Companion Software Configuration

Before the Ultium Analog Output Module can be used with the Noraxon Ultium system, the
companion software must be configured to recognize the different components that make up the
system. Refer to the Ultium System's hardware manual for further instructions.
If the companion software is properly configured, see the following instructions for using the
Ultium Analog Output Module.
P-881 Rev B (May 2019)
on the icon to start the MR3 software
7