Component Interconnections - Noraxon Ultium EMG User Manual

Analog Output
2) Analog Output Module: (Part #881)

6.3 Component Interconnections

Step 1
Step 2
P-881 Rev B (May 2019)
Powered Via:
Part #PSU1: 5V DC, 3.0A Power
Supply (See Section 8)
Analog Signal Transmitted to 3
Party Data Acquisition Unit or a
Noraxon Analog Input System
(Part #222) via:
25-Pin Male to Female Cable: (Part
#291D)
Connect the PSU1 (See
Section 8) to the Analog
Output Module (Part #811)
to provide power.
Connect the Ultium Receiver
(Part #880) to the computer
via the USB port (USB Type
B Male to USB Type A Male
cable)
rd
5