Related Manuals for Noraxon AMTI
Summary of Contents for Noraxon AMTI
- Page 1 AMTI Force Plate System Setup Guide AMTI with MyoForce System Setup Guide (Rev B)
- Page 2 AMTI Force Plate System Setup Guide Welcome from Noraxon Congratulations on acquiring your new force plate system! This guide will provide you with step by step instructions on how to install your new hardware and software, adjust device settings, and record your first data set. First, you need to determine whether you have the hardware for digital or analog integration.
- Page 3 AMTI Force Plate System Setup Guide 1.2 Analog Integration Figure 1: AMTI force plate Figure 3: Analog Input System (Part# 222B) Figure 3: USB A to B Cable (Part# CBL2) Figure 4: AIS connection cable (Part# 222K) Junction Box PJB-101...
-
Page 4: Installing The Hardware
Insert the other end of the Sync cable into any Sync out port on your Noraxon MyoSync Station. Note: The sync cable and the Noraxon MyoSync Station are not required for normal function. If you are synchronizing the force plates with other hardware within your software, you will need the MyoSync Station. - Page 5 Connect the AIS to the PC using the USB A to B cable (CBL02). Step 4 (optional) – Connect the AIS to the Noraxon MyoSync using 3.5 mm stereo cable. Connect the MyoSync to the PC using the USB A to B cable.
-
Page 6: Configuring The Hardware
4 Configuring the Hardware 4.1 Digital Integration Before the AMTI system can be used, the device software settings must be configured to recognize the different components that make up the system. Follow the below instructions to update the plate settings. - Page 7 Before the AMTI system can be used, the device software settings must be configured to recognize the different components that make up the system. Follow the instructions below to recognize the AMTI plates through the AIS and configure the force plate and calibration settings.
-
Page 8: Recording A Measurement
Check the box that says ‘Enabled.’ Navigate to the ‘AMTI plate 1’ tab. Choose “Load” ACL file to load the *acl file that should have come with your AMTI force plates. - Page 9 AMTI Force Plate System Setup Guide Step 2 Insert the devices to be used for the measurement into the configuration by dragging a device in the list of Available Devices to the Devices in your configuration window. Select the desired signals to include in the measurement configuration.
-
Page 10: Viewing A Record
AMTI Force Plate System Setup Guide 6 Viewing a Record To view a previously recorded record, select the Database tab. Records are organized by Project and Subject name. Double click on the record of interest to open the record. 7 Analysis and Reporting There are several features available for force plates that require further setup.