Analog Output
291D
As new accessories may be available after the time of printing, please check the Noraxon website
at this link for the latest offerings
https://www.noraxon.com/
9 Cleaning
9.1 Safety Precautions When Cleaning
WARNING
Only use a damp cloth with mild soap and water or isopropyl alcohol to clean the Ultium
SmartLeads.
Do not immerse Ultium equipment (Sensors, SmartLeads, Receiver, Analog Output
Module) in any water or liquid.
10 Maintenance
10.1 Device Software (firmware) updates
The internal program (firmware) inside the various Ultium devices can be updated via MR3. The
user will be notified within the Ultium System hardware setup if an update is required. Ensure that
all sensors are placed in the Ultium charging dock, the charging dock is connected to the Ultium
receiver, and the Ultium Analog Output Module is connected to the Ultium receiver prior to initiating
the firmware update. If you start the update prior to completing this step, you may need to update
again (firmware update button will still be present in hardware setup).
P-881 Rev B (May 2019)
25-Pin Male to Female Cable
12