Device Communication (Driver) Software Installation - Noraxon Ultium EMG User Manual

Analog Output
Step 3
Step 4
6.4 Device Communication (Driver) Software
No driver installation is needed. The Ultium Receiver communicates over the USB port.
P-881 Rev B (May 2019)
Connect the Ultium Receiver
(Part #880) to the Ultium
Analog Output Module (Part
#881) via one of the three
Auxiliary Ports (AUX1, AUX2,
or AUX3).
Connect the Analog Output
Module (Part #881) to a 3
Party Data Acquisition Unit
(DAQ) via 25-Pin Male to
Female Cable (Part #291D)
Installation
rd
6