Troubleshooting, Default Diagnosis - Noraxon Ultium EMG User Manual

Analog Output

11 Troubleshooting, Default Diagnosis

Symptom: Problem with the EMG Sensor recognizing the SmartLead
Possible Reason
•
SmartLead is disconnected or loose
•
Firmware in the Sensor is outdated. The
EMG Sensor Status LED may be solid
Yellow.
11.1 Website Link to FAQ
Answers to common questions can be found at Noraxon's Frequently Asked Questions (FAQ)
website page at this link:
https://www.noraxon.com/support-learn/technical-support/faqs/
Other educational material is available at this link:
https://www.noraxon.com/support-learn/technical-support/
P-881 Rev B (May 2019)
Remedial Action
•
Check that the SmartLead is inserted fully.
•
Sensor firmware is periodically updated to
support newly designed SmartLeads.
Make sure you have installed the latest
version of MR3 and run a firmware update
if needed.
14