Analog Output
7.5 Storage and Protecting Between Usages
For extended storage or when travelling:
•
Place all sensors into the sensor docking station and power them off. (Press the power
button on the back of the Ultium receiver. When the sensors are shutdown they will stop
blinking completely.)
•
Position all components inside the system traveling case according to their prepared
cavities.
8 Accessories and Optional Modules
8.1 Accessories
Part No.
PSU1
P-881 Rev B (May 2019)
Description
PSU 1 Power Supply (5VDC, 3.0 A)
11