Britax Safe-n-Sound BS7300E-i20133 Series Instructions For Installation & Use page 44

TO REMOVE COVER
To remove headrest cover from adjustable headrest without
side wings:
Remove headrest cover by unclipping the press studs next to
shoulder harness, place shoulder harness straps to the side.
Unhook the elastic loop attached to the headrest cover. Lift
over and away from headrest without side wings.
To Remove Alternative headrest cover with soft wings:
Remove headrest cover by unclipping the press studs next to
shoulder harness. Unclip press studs from headrest without
side wings moulding on each side. Place shoulder harness
straps to the side. Lift headrest cover over and away from
headrest without side wings.
86
Instructions for Installation & Use
Press
Unhook elastic loop
Studs
attached to headrest
cover
Press
Unclip press stud
Studs
from moulding
To remove headrest cover from adjustable headrest
with side wings:
Remove headrest cover by unclipping the press
studs next to the shoulder harness. At the back of the
headrest hardware lift elastic loops over headrest and
peel cover away from the seat.
D. Unhook the elastic loops at the top of the cover
located at the back of the restraint and the elastic
loops at the bottom of the restraint located under the
front of the restraint.
Press
Studs
Unhook elastic loop at the back of
the restraint
87
Instructions for Installation & Use