Britax Safe-n-Sound BS7300E-i20133 Series Instructions For Installation & Use page 38

C. Fit either harness tongue into the harness buckle followed
by the other tongue. A click is heard when the last tongue
is fully engaged.
Should the second tongue not engage - press the
red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness
buckle does not engage correctly then it may require
cleaning or seek replacement - refer to page 84. The
buckle tongues are fully engaged when both tongues
are inserted and 'click' is heard.
D. Ensure slack is removed from harness lap strap by pulling
shoulder straps then pull harness adjustment strap to
adjust harness to a comfortable but firm fit. Ensure that
any slack in harness straps is removed. Shoulder harness
straps must fit firmly to the child. A loose harness could
result in serious injury in an accident.
Do not use the restraint if straps do not tighten. Contact your
local authorised service agent for repair.
Store instruction manual in pocket provided and tuck pocket
under trim cover.
74
Instructions for Installation & Use
Tongue
Buckle
Pull to remove slack from
harness lap straps
Shoulder
Straps
Harness
Lap
Crotch
Straps
Straps
A loose harness is dangerous
Remove
slack
Pull
WARNING: DO NOT LEAVE CHILDREN UNATTENDED
IN THE CAR.
CAUTION: ALWAYS REMOVE SLACK
A LOOSE HARNESS IS DANGEROUS.
Make sure that nothing is obstructing harness straps and that child's arms and legs are free with the
straps in the correct location - see previous page.
Do not use the restraint if straps do not tighten and contact BRITAX Childcare Customer Service.
Refer to back cover for contact details.
75
Instructions for Installation & Use