Britax Safe-n-Sound BS7300E-i20133 Series Instructions For Installation & Use page 18

FITTING SUMMARY
Leave one side of the tether strap slack to
allow the baby to be placed in the restraint.
Store instruction
manual in
pocket provided
and tuck pocket
under trim cover.
Pull to remove some slack - do not over
tighten when finally adjusted with the baby
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED
WHEN THE CHILD RESTRAINT IS USED IN A VEHICLE.
ALWAYS ATTACH THE HOOK AND REMOVE THE SLACK.
34
Instructions for Installation & Use
IMPORTANT: If using an Extension Strap, positioning the attachment clip above the child may lead to
injury in an accident therefore make sure that the attachment clip is not positioned in front of the vehicle
seat. Use a shorter extension strap or no extension strap.
Hook Attachment Clip
to the car's anchor
fitting.
Pull sash portion of
seatbelt to remove
slack.
Feed seatbelt
between restraint
cover and restraint
body (see pages 30
-31).
Attachment Clip should not
be in front of the vehicle
seat front.
Extension Strap
Attachment Clip
Attachment Clip should
be behind the front of
the vehicle seat.
35
Instructions for Installation & Use