Basic Commissioning With Iop - Siemens Sinamics G110M Getting Started

Commissioning

4.7 Basic commissioning with IOP

4.7 Basic commissioning with IOP
Basic commissioning wizard
Select Wizards
Select Application Class
Select Motor Code entry (no)
Summary of settings displayed Setting are saved
If a factory reset is selected, the converter will perform a factory reset immediately.
1
Motor Data is selected a number of screens will be displayed to allow the manual entry of the
relevent motor data. 3If Enter Motor Code is selected, the user will be prompted to enter the
Motor Code from the motor rating label.
76
Select required Commission-
ing wizard
Select Motor Data
Select Technology Application Select Macro Source
3
Distributed converter for SIMOGEAR geared motors
Getting Started, 01/2016, FW V4.7.6, A5E36100338B AD
Select Factory Reset (yes or
no)
1
Select manual Motor Data
entry (yes) or ...
2
If Enter
2