Troubleshooting - Siemens Sinamics G110M Getting Started

Troubleshooting

LED status indicators
The Power Module has number of dual-colour LEDs which are designed to indicate the
operational state of the Inverter. The LEDs are used to indicate the status of the following
states:
● General fault conditions
● Communication status
The location of the various LEDs on the Power Module and Communications and Power
Interface (which is attached to the terminal housing) are shown in the figure below.
Image 5-1
Explanation of status LEDs
An explanation of the various states indicated by the LEDs are given in the tables below.
Distributed converter for SIMOGEAR geared motors
Getting Started, 01/2016, FW V4.7.6, A5E36100338B AD
Status LED locations
5
87