Mechanical Installation - Siemens Sinamics G110M Getting Started

Installation

3.1 Mechanical Installation

Converter must not be used as a step or ledge
The converter has not been designed to support a substantial weight and therefore must
not be used as a step or a ledge.
Should substantial weight be placed on the system it could result in severe damage to the
equipment which could adversely affect the application and any persons coming in contact
with the system.
3.1 Mechanical Installation
Dimensions of the system
The converter has two frame sizes. Frame size A (FSA) and Frame size B (FSB), the
dimensions of each frame size is given in the figure and table below.
Image 3-1 Dimensions of the converter
Table 3- 1 Converter dimensions
Frame size
A
B
24
CAUTION
H L
(mm) (mm)
135 270
135 309
D1 D2
(mm) (mm)
208 216
208 216
Distributed converter for SIMOGEAR geared motors
Getting Started, 01/2016, FW V4.7.6, A5E36100338B AD
D3 W (mm)
(mm) without glands
161 132
181 132