Replacing The Charge Corotron - Xerox EC70 User Manual

Maintenance
R R e e p p l l a a c c i i n n g g t t h h e e C C h h a a r r g g e e C C o o r r o o t t r r o o n n
1. Ensure that the machine has stopped running, and open the Front Door.
2. Pull down the R1-R4 handle.
3. Raise the release handle.
4. Open the packaging for the new charge corotron and place gently the new charge corotron on a
flat surface near the machine.
Note: Do not expose drum cartridges to direct sunlight or strong light from indoor
fluorescent lighting for more than 2 minutes. Image quality can deteriorate when the drum
cartridges are exposed to light.
5. Open the drum drawer.
6. Grasp both of the amber-gold colored casings on the old charge corotron and push toward the
back of the machine. You hear a clicking noise that indicates that it is being released.
7. Remove the old charge corotron by holding the amber-gold colored casings provided at both ends
of the charge corotron and pulling gently straight up.
8. Lower the new charge corotron gently into the machine straight down, and not at an angle.
9. Grasp the amber-gold colored casings on the new charge corotron and pull toward the front of
the machine until you hear a clicking noise to indicate that the charge corotron is in place.
10. Push in the drum drawer completely. Return the release handle to its original position.
11. Return the R1-R4 handle to the original position and close the front door.
12. Insert the used charge corotron into an empty container for recycling.
116 Xerox ® EC70 Color Copier/Printer
User Guide