Feed Counter Check - Xerox 5915 Service Manual

2-10
Feed Counter Check/Clearance.
Function:
This displays or clears Feed Counters for all
trays .
Procedure:
1. Enter Diagnostic(C/E) Mode.
2. Enter Chain Code "30" and press the Start
button.
3. Enter the Function Code for the Feed
Counter to be checked. Press the Start
button.
• The counter value is displayed by the unit
of k on the Quantity Display.
• When not clearing the counter value, go to
Step 5.
4. Enter "0" with the keyboard and press the
Start button.
• The counter value is cleared.
• If you enter any other value than "0, " "Er"
appears.
5. Pressing the Stop Clear button once will
initiate the Function Code Entry awaiting
status, while pressing it twice will initiate the
Chain Code Entry awaiting status.
REF.: Counter Value is countable within the
range of 0~99k feeds, but uncountable
when it exceeds 99k.
CHAIN FUNCTION COMPONENT
CODE CODE COUNTER
30 1 Tray 1 Feed Counter
4 MSI Feed Counter
JAM Counter Check.
Function:
This counts Original/Paper Jams and display
their counts for every component where they
occur.
Procedure:
1. Enter Diagnostic(C/E) Mode.
2. Enter Chain Code "40" and press the Start
button.
3. Enter the Function Code for the counter to
be checked. Press the Start button.
• The counter value is displayed on the
Quantity Display.
5. To exit this mode, press the Stop Clear
button twice.
NOTE: Counter Value is countable within
the range of 0~99 feeds, but
uncountable when it exceeds 99K.
CHAIN FUNCTION
CODE CODE
40 1
2
5
10
21
22
25
30
Jam Counter Reset.
Function:
This clears Original/Paper Jam Counters.
Procedure:
1. Enter Diagnostic(C/E) Mode.
2. Enter Chain Code "40" and press the Start
button.
3. Enter the Function Code for the counter to
be checked. Press the Start button.
4. To exit this mode, press the Stop Clear
button twice.
COMPONENT COUNTER
E1 JAM Counter
E3 JAM Counter
C1 JAM Counter
C9 JAM Counter
E1 JAM Counter Reset
E3 JAM Counter Reset
C1 JAM Counter Reset
C9 JAM Counter Reset
Section 2 Troubleshooting
2.2 Diagnostic(C/E) Mode