Malaguti CIAK MASTER 50-4T Electric System Troubleshooting page 23

3. LOW BEAM LIGHT DOES NOT COME ON.
3.1 Check lamp and lamp socket.
- See the "Checking switches" section (on page 12).
3.2 Checking voltage level.
- Detach cables of headlight and connect Tester (DC 20V),
as follows:
- Terminal (+) of Tester
- Terminal (-) of Tester
- Run engine at approx. 2000 RPM.
- Flick light switch to ( ) symbol.
- Flick light switch to (LO) symbol.
- Value read must be approximately 12 Volts.
- The blue/white cable between left hand switch and headli-
ght is interrupted.
- Repair.
- See "Wiring Diagram".
10.05
ISSUE
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
Light system
CONTINUITY
Blue/white cable (1).
Black cable (2).
NOT COMPLIANT
NO CONTINUITY
- Replace lamp and/or lamp socket.
1 2
SECTION 2
B
CHAPTER
N
BL/B
25
PAGE
SECTION 2