Malaguti CIAK MASTER 50-4T Electric System Troubleshooting page 14

B
CHAPTER
4. Key switch
- Detach four-way connector and white/black cable of the
switch.
- Connect Tester ( ) as follows:
- Terminal (+) of Tester
- Terminal (-) of Tester
- Key "ON"
- Key "OFF"
CAUTION:
If the white/black cable is crushed, it can form a
grounding contact and the engine will not start.
5. Wiring connections
- Check connections of ignition system.
- See "Wiring Diagram".
- Replace the C.D.I. control unit.
16
PAGE
SECTION 2
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
Ignition system
Black cable (1).
White/black cable (2).
No continuity.
Continuity.
COMPLIANT
OK
SECTION 2
1
2
NOT COMPLIANT
- Replace key switch.
FAULTY CONNECTIONS
- Repair wiring on the basis of the
"Wiring Diagram".
10.05
ISSUE