Malaguti CIAK MASTER 50-4T Electric System Troubleshooting page 19

6. Start switch
- Detach six-way connector of right hand switch (1)
and connect Tester ( ) as follows:
- Terminal (+) of Tester
- Terminal (-) of Tester
Press Start button and check continuity.
7. Front/rear stop switch
- Disconnect red cable and white/grey cable of stop switch
(3).
- ConnectTester ( ) as follows:
- Terminal (+) of Tester
- Terminal (-) of Tester
Operate brake lever and check continuity.
8. Wiring connections
- Check connections of the starting system.
- See "Wiring Diagram".
10.05
ISSUE
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
Electric starter system
White/red cable.
Black cable.
CONTINUITY
Terminal (1).
Terminal (2).
CONTINUITY
NO CONTINUITY
- Replace right hand switch.
NO CONTINUITY
- Replace stop switch.
NOT COMPLIANT
- Put wiring in working order.
SECTION 2
B
CHAPTER
1
3
2
1
21
PAGE
SECTION 2