Cooling Fan Run-On; Safety - Miele H 7464 BPX Operating And Installation Instructions

Settings

Cooling fan run-on

The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven compartment, on the
control panel or on the oven housing
unit.
–
Temperature-controlled
The cooling fan switches off when
the temperature in the oven drops
below 70 °C.
–
Time-controlled
The cooling fan switches off after a
period of about 25 minutes.
Condensate can damage the oven
housing unit, damage the worktop
and lead to corrosion in the oven.
If you have set the cooling fan
to Time-controlled
the oven compartment to keep
warm, moisture levels in the oven will
increase, leading to condensation
forming on the fascia panel and
surrounding kitchen furniture, and
drops of moisture collecting under
the worktop.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to Time-controlled
40
and leave food in
.

Safety

Sensor lock
The sensor lock prevents the cooking
programme being switched off by
mistake or settings being changed.
Apart from the On/Off  sensor, the
activated sensor lock prevents the
sensors and fields in the display from
working a few seconds after a
programme has been started.
– On
The sensor lock is switched on.
Touch the OK sensor for at least
6 seconds to deactivate the sensor
lock for a short period of time.
– Off
The sensor lock is deactivated. All
sensor controls react to touch as
normal.
If you want to switch off the oven with
the sensor lock activated, touch the
On/Off  sensor until the oven
switches off.
System lock 
The system lock prevents the oven
being switched on by mistake.
The minute minder and the MobileStart
function can still be used when the
system lock is active.
The system lock will remain activated
even after a power failure.
–
On
The system lock is switched on.
Before you can use the oven, touch
the OK sensor for at least 6 seconds.
–
Off
The system lock is deactivated. You
can use the oven as normal.