Pre-Heat - Miele H 7464 BPX Operating And Installation Instructions

Operation

Pre-heat

It is only necessary to pre-heat the oven
in a few instances.
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the heating-up
phase.
If you have set a cooking duration, it
will only start to count down when the
target temperature is reached and you
have placed the food in the oven.
Start the cooking programme
immediately without delaying the start
time.
56
Switching on the Pre-heat function
The Pre-heat function can be used with
any oven function and has to be
switched on separately for each
cooking programme.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch on the
function for this cooking programme.
 Select the  sensor.
 Select
Pre-heat
 Confirm with OK.
The following message is displayed
with a time:
Place food in oven at
oven compartment is heated to the set
temperature.
 As soon as you are prompted to do
so, place the food in the oven
compartment.
 Confirm with OK.
Pre-heat
| On .
... The