Pyrolytic Programme Recommendation; Cooling Fan Run-On; Camera In Oven; Proximity Sensor - Miele H 7890 BP Operating And Installation Instructions

Settings
Pyrolytic programme
recommendation
You can set whether the
recommendation for carrying out
pyrolytic cleaning will appear (
reminder ) or will not appear (
).
reminder

Cooling fan run-on

The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven compartment, on the
control panel or on the oven housing
unit.
-
Temperature-controlled
The cooling fan switches off when
the temperature in the oven drops
below 70 °C.
-
Time-controlled
The cooling fan switches off after a
period of about 25 minutes.
Condensate can damage the oven
housing unit, damage the worktop
and lead to corrosion in the oven.
If you have set the cooling fan
to
Time-controlled
the oven compartment to keep
warm, moisture levels in the oven will
increase, leading to condensation
forming on the fascia panel and
surrounding kitchen furniture, and
drops of moisture collecting under
the worktop.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to Time-controlled
40
With
Without
and leave food in
.

Camera in oven

If you have selected the setting
in oven | On , you can have images from
the oven compartment sent to your
mobile device during a cooking
programme.
For this you will need the Miele App
installed on your mobile device as well
as have the Miele@home system
installed (see "Settings –
Miele@home").
When the door is closed, the camera
takes a photo of the food on the
uppermost shelf in use at regular
intervals.
The oven interior lighting is switched on
during the entire cooking programme to
achieve optimum transmission quality.
If necessary, you can change the
settings for the cooking programme
using the Miele App.

Proximity sensor

The proximity sensor detects when you
approach the touch display, e.g. with
your hand or body.
If you want the proximity sensor to
respond even when the oven is
switched off, select the
QuickTouch | On setting.
Camera
Display |