Miele H 7464 BPX Operating And Installation Instructions page 98

Cleaning and care
Preparing the descaling process
Risk of damage from spilt descaling
solution.
Sensitive surfaces and/or natural
floors can suffer damage.
Wipe up any spillages of descaling
agent immediately.
You will need a container of approx.
1 litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele
appliances for optimum cleaning
results.
Useful tip: Miele descaling tablets are
available to order from the Miele online
shop or directly from Miele.
Other descaling agents, which contain
other acids besides citric acid and/or
other undesirable substances, such as
chlorides, could cause damage.
Moreover, the descaling result
required cannot be guaranteed if the
descaling solution does not have the
appropriate concentration.
 Fill the container with approx. 600 ml
of cold tap water and thoroughly
dissolve one descaling tablet in it.
98
Starting the descaling process
 Select
Other .
 Select
Descale .
If the functions and Automatic
programmes that use moisture
injection are already disabled, the
descaling process can be started
immediately by touching OK.
 Place the universal tray on the top
shelf level to collect the descaling
solution after it has been used.
Confirm the message shown with OK.
 Place the container with the
descaling solution on the floor of the
oven.
 Attach one end of the plastic tube to
the water intake pipe. Place the other
end of the plastic tube in the bottom
of the descaling solution container
and secure the plastic tube to the
container with the suction cup.
 Confirm with OK.
The intake process will begin. You will
hear the noise of the pump.
You can interrupt and resume the
intake process at any time by
selecting OK.