Moffat turbofan E32SUBC Service Manual page 66

12
References
E32SUBC - CONTROLLER SETTING REFERENCE GUIDE
Entering programming modes
1. Hold the 'P' key for 3 seconds.
2. Display shows programming menu screen.
3. Scroll up/down to required and press P key to access.
4. Enter password as per below.
Service Settings
Temp offset Temp offset oven probe
Diagnostics Oven probe temp
E32SUBC OVEN and PROOFER
Revision 3
Password Pvr#2, Ov#3, Pvr#2, Pvr#3
Temp offset prover air probe
Temp offset prover water probe
Proofer probe air temp
Proofer probe water temp
Door switch Open/Close
Float switch Open/Close
Humidity probe reading
Oven heat relay output status
Oven power ON relay output status
Proofer heat relay output status
Proofer water heater relay output
status
Proofer power ON relay output status displays ON or OFF status
Oven fan realy output status
Setting range
+/-11
+/-11
+/-11
displays current probe reading
displays current probe reading
displays current probe reading
displays door switch status
displays water tank float switch status
displays current probe humidity reading
displays ON or OFF status
displays ON or OFF status
displays ON or OFF status
displays ON or OFF status
displays ON or OFF status
62
Default Setting
-1
+4
+2
© Moffat Ltd, September 2009