Moffat turbofan E32SUBC Service Manual page 27

Fault
No heat
No temperature control
(temperature overrun)
Slow recovery
Door does not close
Door seal leaks
E32SUBC OVEN and PROOFER
Revision 3
Possible cause
Temperature probe faulty
(Refer fault diagnosis 5.3.3)
Electronic control faulty.
(Refer fault diagnosis 5.3.3)
Control relay faulty
(Refer fault diagnosis 5.3.3)
Heating contactor faulty.
(Refer fault diagnosis 5.3.3)
Element faulty (blown).
(Refer fault diagnosis 5.3.3)
Heating contactor faulty.
(Refer fault diagnosis 5.3.3)
Electronic control faulty.
(Refer fault diagnosis 5.3.3)
Overloading of oven.
Fan not working.
Element not working.
Tray in way of door.
Door seal obstruction.
Door catch setting incorrect.
Door pivot bushes / pins worn.
Door seal damaged.
Door seal incorrectly fitted.
Door catch setting incorrect.
Door pivot bushes / pins worn.
Door catch striker plate worn.
23
Trouble-shooting
Remedy
Identify fault and correct.
Replace.
Replace
Replace.
(Refer service section 6.2.5)
Replace.
(Refer service section 6.2.6)
Replace.
(Refer service section 6.2.5)
Replace.
Reduce oven loading.
Check fan operation.
Correct element fault.
(Refer Fault: No Heat)
Correctly position tray in rack.
Correctly install door seal.
(Refer service section 6.2.13)
Adjust.
(Refer service section 6.4.4)
Replace.
(Refer service section 6.2.2)
Replace.
(Refer service section 6.2.13)
Correctly install door seal.
(Refer service section 6.2.13)
Adjust.
(Refer service section 6.4.4)
Replace.
(Refer service section 6.2.14)
Replace.
© Moffat Ltd, September 2009
5