Wet Element; Light Bulb / Glass; Fan - Moffat turbofan E32SUBC Service Manual

Two Screws
Figure 6.3.4b
5) Replace and re-assemble in reverse order.
6.3.5

Wet Element

1) Remove RH side panel (refer 6.4.2), and
remove wires from element terminals. Undo
nuts on element studs
Figure 6.3.5
2) With door open, remove right hand side rack
and water tank.
3) Pull element carefully into proofer to remove.
4) Replace and reassemble in reverse order.
E32SUBC OVEN and PROOFER
Revision 3
Service Procedures
6.3.6

Light Bulb / Glass

1) Open the proofer door.
2) Pull off lamp cover.
3) Unscrew bulb out of fitting.
4) Screw in replacement bulb.
5) Refit lamp cover.
6.3.7

Fan

1) Remove RH side panel (refer 6.1.4).
2) Remove wires from fan motor, noting their
positions.
3) Remove baffle from inside proofer (4 screws)
4) Undo nut from centre of fan and remove
blade.
5) Undo 4 screws that secure fan motor to
proofer.
6) Re-assemble in reverse order.
39
Lamp
covers
Figure 6.3.6
Figure 6.3.7
Centre nut
© Moffat Ltd, September 2009
6