6
Service Procedures
6.1
Access
6.1.1
Oven control panel
1) Undo the two screws at the bottom of the
control panel.
2) The panel can now be removed.
When closing the panel ensure wires are clear
of metal.
Two screws
Figure 6.1.1
6.1.2
Oven service panel
1) Undo the four screws holding the panel.
2) Remove side panel.
Figure 6.1.2
E32SUBC OVEN and PROOFER
Revision 3
6.1.3
1) Remove two screws at bottom of front panel.
2) Front panel can now be lowered and hinged
on lower bracket.
3) When closing control panel ensure no wires
are trapped.
6.1.4
1) Undo the four screws holding the panel.
2) Remove side panel.
Four Screws
32
Proofer front panel
Two Screws
Figure 6.1.3
Proofer service panel
Figure 6.1.4
© Moffat Ltd, September 2009
Four Screws