Elements; Fan - Moffat turbofan E32SUBC Service Manual

6.2.6

Elements

1) Remove service panel (refer 6.1.2) and
baffle.
2) Remove the wires from the elements.
Figure 6.2.6a
3) Unscrew the elements from outside of the
oven by unscrewing securing collars
4) Pull elements carefully to remove.
sealant may require
elements.
Figure 6.2.6b
5) Replace and re-assemble
order. Use high temperature (232°C / 450°F
minimum) RTV silicone sealant to seal ele-
ment against side wall of oven.
E32SUBC OVEN and PROOFER
Revision 3
Element wires
Silicone
effort to remove
Element securing collars
in reverse
Service Procedures
6.2.7

Fan

1) With right hand rack removed undo the grub
screw securing the fan to the motor shaft.
2) Remove the fan from the shaft, replace, and
reassemble.
6.2.8 Fan Motor
1) Remove fan (refer 6.2.7).
2) Remove the right hand service panel and
then remove the motor wires.
3) Undo the four screws holding the motor in
place and remove motor.
4) Replace motor and reassemble in reverse
order.
35
Grub Screw
Figure 6.2.7
Four screws
Figure 6.2.8
© Moffat Ltd, September 2009
6