Basic Operations; Setting Operations Of A/V Components - Sony RM-VL1400T Operating Instructions Manual

Basic Operations

Setting operations of A/V components

—Setting component code
The Remote Commander is preset at the factory to operate Sony brand A/V components.
(Refer to the table below.)
If you are using the Remote Commander with factory-set Sony components, skip the
following procedures.
To use with other brand A/V components, or Sony A/V components which do not
function with the Remote Commander, you need to follow the procedures to set the
component code.
Factory preset
COMPONENT select buttons
TV
VCR
SAT
DVD
Label select button-left
Label select button-centre
Label select button-right
Label select button-left
Label select button-centre
Label select button-right
1
Refer to the tables in the
supplied "Preset Code List" to
find the four-digit preset code
for the desired A/V
component.
If more than one code number is
listed, use the number that is listed
first. For example, to set up a
Panasonic TV, you would use the code
number 8095.
2
While pressing the
button, press the OTHER
button.
"SET MODE" appears as the screen
title.
Screen title
TV
VCR
SAT
DVD
CABLE
DVD-R
AMP
CD
MD
TAPE
3
Press the V/v buttons to
select "1 PRESET", then press
the OK button or the centre
Label select button.
"PRESET" appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
4
Press the COMPONENT
select button for the desired
A/V component.
The selected A/V component's label
and the preset code currently set
appear on the screen.
(light)
Tips
Preset A/V components
Sony TV (Analogue)
Sony VCR (Video Cassette Recorder)
Sony Analogue Satellite Receiver
Sony DVD player
Analogue Cable box
Sony DVD Recorder
Sony Receiver/Amplifier
Sony CD player
Sony MD deck
Sony Cassette deck
• To set A/V components which are not
specified on the COMPONENT select
buttons, press the OTHER button
repeatedly, then press the Label select
button corresponding to the desired A/V
component.
• You can set components to the
COMPONENT select buttons or Label
select buttons than those that are
specified on each other button or on the
screen. Note however, that the TV button
can only be set a TV, and the Label select
button (to which an amplifier is set at the
factory preset) can only be set an
amplifier or DVD player home theatre
system.
Continued
7 GB