Basic Menu Operations - Sony RM-IP500 Operating Instructions Manual

 FUNCTION menu
This menu is used to configure functions
assigned to buttons using shortcuts.
For details, see "Setting Specific Functions
using Shortcuts (excluding ILME-FR7)"
(page 59).
For an ILME-FR7 target camera, see "Setting
Specific Functions using Shortcuts (ILME-
FR7)" (page 60).

Basic menu operations

Buttons and knobs used for RM menu
operations
Operation Buttons and knobs used
OPERATION
menu
Display the Press the RM MENU button.
top menu.
Select a top Turn the SELECT knob.
menu item.
Confirm the Press the SELECT button.
menu item
selection.
Select a Turn the SELECT knob.
setup menu
item.
Confirm the Press the SELECT button.
setup menu
item
selection.
Select a Turn the SELECT knob.
setup menu
sub item.
Change the Turn the VALUE knob.
setting of the
setup menu
sub item.
Confirm the Confirmation not
changed required.
setting.
Save Saved on the
settings. camera using the
camera preset
memory
*3
function.
Go back one Press the CANCEL
level in the button.
menu.
*1 A confirmation message appears for settings that
display an EXEC item.
*2 If the CANCEL button is pressed before attempting to
save, the menu display goes back one level and
restores the existing setting.
*3 For details about items saved with a preset number,
refer to the operating instructions for each camera.
CONFIG, AUTO IP
SETUP, or
MAINTENANCE
menu
*1
Press the VALUE
*1
button.
Save on the unit.
Press the CANCEL
*2
button.
Typical RM menu operation
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to the desired item to set.
The cursor moves up/down as the SELECT
knob is turned.
Cursor
3
Press the SELECT button.
The menu for the selected item appears.
4
Turn the SELECT knob to move the cursor
to the desired setup menu item.
The cursor moves up/down as the SELECT
knob is turned.
Cursor
5
Press the SELECT button.
The selected menu item and its setup items
appear.
13
2~7
1