Others; Setting The Button Illumination - Sony RM-VL1400T Operating Instructions Manual

Others

Setting the button
illumination
You can change the setting of the button
illumination of the Remote Commander.
The button illumination is preset at the
factory to turn off automatically if you do
not operate within 10 seconds. You can
also change the brightness and fade effect
(which adjusts the brightness of the button
illumination) of the button illumination
and which buttons activate the button
illumination.
1
While pressing the
button, press the OTHER
button.
"SET MODE" appears as the screen
title.
2
Press the V/v buttons to
select "5 UNIT SETTINGS",
then press the OK button or
the centre Label select button.
"UNIT SETTINGS" appears as the
screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3
Press the V/v buttons to select
"1 LIGHT OFF TIME", then
press the OK button or the
centre Label select button.
"LIGHT OFF TIME" appears as the
screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
24 GB
4
Press the B/b buttons or the
left or right Label select
button.
You can set the automatic-off time
from 1 to 60 seconds. Each time the
button is pressed, the time decreases/
increases by 1 second.
Note
If you set the automatic-off time to
longer than 10 seconds, the battery
life may be shorter.
5
Press the
centre Label select button, the
(light)
OK button, or the RETURN
button.
"UNIT SETTINGS" appears as the
screen title.
6
Press the V/v buttons to select
"2 LIGHT BRIGHTNESS",
then press the OK button or
the centre Label select button.
"LIGHT BRIGHTNESS" appears as
the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
7
Press the B/b buttons or the
left or right Label select
button.
You can set the brightness from 1 to
15. Each time the button is pressed,
the level decreases/increases by 1.
8
Press the
centre Label select button, the
OK button, or the RETURN
button.
"UNIT SETTINGS" appears as the
screen title.
(light) button, the
(light) button, the