Menu Configuration And Basic Menu Operations; Basic Operating Procedure - Sony RM-B750 Operation Manual

Menu Configuration and Basic Menu Operations

The RM-B750 provides menu operations for various
functions such as adjustments of system equipment.

Basic Operating Procedure

Unlit when setting the
menus of this unit.
MONITOR
FUNCTION
VF DISP
MAINTENANCE
VF MENU
SCENE
CANCEL
PAINT
ENTER
MENU SELECT BRIGHT
1
When all the menu select buttons are not lit, the status
display (see the next page) is obtained.
1
To display a menu of this unit, press and light one
of the menu select buttons.
The menu operation mode is initiated and the menu
for the pressed button appears on the display.
FUNCTION: Function menu
See page 15(E) for the display configuration and page
24(E) for the menu items.
MAINTENANCE: Maintenance menu
See page 21(E) for the menu items and page 25(E) for
adjustments.
SCENE: Scene file operation menu
See page 14(E) for the display configuration and
operation.
PAINT: Paint menu
See page 13(E) for the display configuration and page
16(E) for the menu items.
2
CONTRAST
3
2
Select the item to be adjusted.
Press the button that shows the name of the item on
the menu to obtain the corresponding adjustment
display or operation area.
When the selected menu is composed of
multiple pages
With the menu that is composed of multiple pages
such as Paint menu, press v or V to flip the pages.
See "Initial display (Paint menu)" on the next page.
When a submenu is shown
Press the desired submenu item to change the
display.
See "Submenu" on page 13(E).
3
Set or adjust the item (parameters).
• Turn the control knobs (or press the button) to
adjust (or set) the corresponding item
(parameters) to the desired values.
See "Adjustment display (Paint menu)" on page 13(E).
• When a message is displayed, follow the
instruction and press
When the adjustment is finished
• To adjust another item of the same menu, press the
names of that item.
• To adjust items of another menu, press the
corresponding menu select button.
• To release the menu operation mode, press the lit
menu select button.
• You may select Function menu without exiting the
currently selected menu. When you exit Function
menu by either of the following methods, the
previous menu is restored.
– Press the lit FUNCTION button so that it goes dark.
– Press the lit menu select button for the previous
menu.
[OK]
.
11(E)