Additional Information; Precautions; Maintenance; Specifications - Sony RM-VL1400T Operating Instructions Manual

Additional Information

Precautions

• Do not drop the unit or give a shock to
the unit, or it may cause a malfunction.
• Do not leave the unit in a location near
heat sources, or in a place subject to
direct sunlight, excessive dust or sand,
moisture, rain or mechanical shock.
• Do not put foreign objects into the unit.
Should any liquid or solid object fall
into the unit, have it checked by
qualified personnel before operating the
unit any further.
• Do not expose the remote control
detectors of your components to direct
sunlight or other strong illumination.
Too much light there can interfere with
remote control operations.
• Be sure to place the Remote
Commander out of the reach of small
children or pets. Components such as air
conditioners, heaters, electric
appliances, and electric shutters or
curtains receiving an infrared signal can
be dangerous if misused.

Maintenance

Clean the surface with a soft cloth slightly
moistened with water or a mild detergent
solution. Do not use any type of solvent
such as alcohol, benzine or thinner as they
may damage the finish of the surface.
30 GB

Specifications

Operating distance
Approx. 10 meters (32.8 ft.) (varies
depending on components of different
manufacturers)
Power requirements
Two LR6 (size AA) alkaline batteries (not
supplied)
Battery life
Approx. 5 months
• When turing on or off a Sony TV for
approx. 300 times per day using
alkaline batteries.
• When adjusting the button illumination
setting to Brightness: 5 and Light on
time: 10 seconds, and adjusting the
Display setting to Brightness: Level 1
and Display on time: 30 seconds.
Dimensions
Approx. 60.4 × 227.5 × 29.4 mm
(w × h × d) (2 × 9 × 1
1
/
2
Mass
170 g (6 oz.) (not including batteries)
Learnable signals *
Capacity per signal: up to 300 bits
Signal frequency range: 455 kHz and up
to 300 kHz
Signal interval: up to 1 second
* Some signals cannot be learned by the
Remote Commander, even though the signals
comply with these specifications.
Design and specifications are subject to
change without notice.
The validity of the CE marking
is restricted to only those
countries where it is legally
enforced, mainly in the
countries EEA (European
Economic Area).
3
/ in.)
16