Proper Mounting; Freezing Of The Exhaust Air Outlets - Siemens SIPART PS2 Operating Instructions Manual

NOTICE
Torque with NPT screwed gland
Device damage. The maximum torque of the cable gland must not be exceeded.
● To avoid damage to the device, the NPT adapter must be held in place while the NPT gland
4.1.2

Proper mounting

4.1.2.1

Freezing of the exhaust air outlets

NOTICE
Freezing of the exhaust air outlets
When devices of the type 6DR5..0/1/2/3 are used, the exhaust air outlets
function of the device is impaired.
● Do not install the positioner with the base plate
①
②
Figure 4-1
Loss of type of protection
Risk of explosion. Damage to device if the enclosure is open or not properly closed. The type
of protection specified on the nameplate or in Technical data (Page 281) is no longer
guaranteed.
● Make sure that the device is securely closed.
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
is screwed into the NPT adapter. Refer to the section "Technical specifications
> Construction (Page 282)" for the torque value.
Base plate
Exhaust air outlets
Exhaust air outlets, base plate
WARNING
4.1 Basic safety instructions
②
①
pointing up.
Installing/mounting
may freeze. The
41