Booster Mounting, Flameproof Enclosure - Siemens SIPART PS2 Operating Instructions Manual

Result
Left:
E.5

Booster mounting, flameproof enclosure

Requirements
1. You are familiar with the safety instructions in section "Installing and mounting (Page 39)".
2. You have one of the following boosters:
– With single-acting positioners, booster with the article number 6DR4004-1RJ or -1RK
– With double-acting positioners booster with the article number 6DR4004-2RJ or -2RK
A. Mount extension shaft and booster
Using the example of a single-acting positioner in a flameproof enclosure (Ex d)
1. Remove the extension shaft
2. Lower the extension shaft
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
Single-acting positioner with moun‐
ted booster
①
from the booster mounting kit.
①
completely into the positioner.
E.5 Booster mounting, flameproof enclosure
Right: Double-acting positioner with moun‐
ted booster
Booster
341