'35.Ydir' Direction Of Action Of Manipulated Variable For Display And Position Feedback; ' 36.Ycls' Tight Closing/Fast Closing With Manipulated Variable - Siemens SIPART PS2 Operating Instructions Manual

Parameter assignment
8.3 Description of parameters
Figure 8-2
Figure 8-3
8.3.2.8

'35.YDIR' Direction of action of manipulated variable for display and position feedback

Possible settings:
Purpose:
Factory setting:
8.3.2.9

' 36.YCLS' Tight closing/fast closing with manipulated variable

Possible settings:
150
Example: YNRM = MPOS with YA = 10 % and YE = 80 %
Example: YNRM = FLoW with YA = 10 % and YE = 80 %
● riSE
● FALL
This parameter is used to set the direction of action of the display
and the position feedback. The direction can be rising or falling.
riSE
no None
uP Tight closing Up
do Tight closing Down
uP do Tight closing Up and Down
Fu Fast closing Up
Fd Fast closing Down
Fu Fd Fast closing Up and Down
uP Fd Tight closing Up and fast closing Down
Fu do Fast closing Up and tight closing Down
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC