Siemens SIPART PS2 Operating Instructions Manual page 155

Note
If the extended diagnostic is activated using parameter "'50.XDIAG' Activation of extended
diagnostics (Page 160)" with setting "On3", then the alarms are not output through the alarm
module. Alarm A1 is output with setting "On2". However, notification via the communication
interface is possible at any time.
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
Direction of action and hysteresis
Parameter assignment
8.3 Description of parameters
Alarm module
Examples A1
A1 = 48
AFCT = MIN / MAX
A2 = 52
Way =45 Active
Way =50
Way =55
A1 = 48
AFCT = -MIN / -MAX
A2 = 52
Way =45
Way =50 Active
Way =55 Active
A1 = 52
AFCT = MIN / MAX
A2 = 48
Way =45 Active
Way =50 Active
Way =55
A1 = 52
AFCT = -MIN / -MAX
A2 = 48
Way =45
Way =50
Way =55 Active
A2
Active
Active
Active
Active
Active
Active
155