Connecting Diskashur Pro Ssd - iStorage diskashur PRO SSD User Manual

1. Connecting the diskAshur PRO SSD
Be sure to review the following information before you begin to use the diskAshur PRO SSD.
Attention: Use only the included cables with your diskAshur PRO SSD. You might damage the drive if you
use a cable not included with the diskAshur PRO SSD.
diskAshur PRO SSD is designed for portable use without an AC power adapter and in most cases will be able to power on a
single USB port. In the event that diskAshur PRO SSD is unable to power on a single USB connection, use the included USB
Y-cable. The diskAshur PRO SSD is not self-powered and requires connection to a USB port to perform all operations.
1. Attach the integrated USB cable of the diskAshur PRO SSD to an available USB port
on your computer, as shown below.
Note: While diskAshur PRO SSD will work with any USB port, for the
fastest speeds connect to a USB 3.0 port on your computer.
2. At least one of the diskAshur PRO SSD LEDs should turn on, indicating that
it is receiving power.
Note: If none of the LED indicator lights turn on or the drive locks when writing to the
diskAshur PRO SSD, use the included USB Y-cable.
Refer to directions on the following page.
www.istorage-uk.com
#5