To Enter Admin Mode; To Exit Admin Mode - iStorage datAshur Pro2 User Manual

Note: Once datAshur PRO
only, during which time the datAshur PRO
immediately (if not connected to a USB port) by pressing and holding down the SHIFT (
or by clicking the 'Safely Remove Hardware/Eject' icon within your operating system when connected to a USB
port.
When the datAshur PRO
keypad.

5. To Enter Admin Mode

To Enter Admin Mode, do the following.
1. Press and hold down the SHIFT (
for one second
2. In Standby State (solid
KEY ( ) button once
3. With the GREEN and BLUE
enter the Admin PIN and press the KEY ( ) button
again
4. Press the KEY ( ) button Three times
within 2 seconds (KEY ( ) x 3)

6. To Exit Admin Mode

When the datAshur PRO
2
the drive can accept instructions via the keypad allowing it to be configured with a host of security features. If no key event
happens within 30 seconds, the datAshur PRO
RED LED which then fades out to the Idle state (all LEDs off).
To immediately exit Admin Mode (solid
BLUE LED switches to a solid
datAshur PRO must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.
2
#8
has been successfully unlocked, the
2
2
is unlocked and connected to a USB port, it will not accept further instructions via the
2
) button
RED LED) press the
LEDs blinking together,
is in Admin Mode, the BLUE
will exit Admin mode automatically - the solid
2
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle state. To access the drive contents (data), the
GREEN
needs to be connected to a powered USB port. It can be locked down
RED, GREEN
sequence then the
finally switches to a solid
device is in Standby State
GREEN and
GREEN and
several times and then to a solid
changing to a blinking
device is unlocked
Blinking
LED indicating the device is in Admin mode
LED will remain on and solid for 30 seconds only, during which time
www.istorage-uk.com
LED will remain blinking for 30 seconds
) button for a second
and BLUE LEDs blink once in
GREEN LED blinks twice and
RED LED indicating the
BLUE LEDs blink together
BLUE LEDs will alternately blink
BLUE
GREEN LED indicating the
GREEN LED will change to a solid
BLUE LED switches to a solid
) button for a second - the solid
LED
BLUE